WWZMDiB 1KG/5KG/10KG/20KG Load Cell Amplifier+HX711 24-Bit ADC Weighing Sensor Module Used to Measure Force, Pressure, Displacement, Strain, Torque, Acceleration. (10KG)

Works as advertised, wired up to an Ardrino, wrote the sketch, and bingo got the signal, no problems. Calibrated fine and off to the races.

Good product. Very precise down to -+1% accuracy. Easy to manipulate. Recommend

not sure why it's so rare to find a technical sheet on amazon, I attached dimensions to the bolt holes.

Pictures 4 units. Delivered 1. Watch out for fine print!

They work perfectly. Quick delivery too! That said, I was expecting 4 of them.

For the price, it's an excellent deal to get both the load cell and amplifier together. Saves the headache of finding another product and reading more reviews.Soldered them up, ran Arduino's calibration example for the HX711 amplifier, and set up a simple scale program. Less than 0.5% error on forces as low as 10g. I needed high accuracy at low forces and that's what I got.

The pictures indicate this is 13 x 13 x 75mm with four M4 holes. I have bought a bunch of similar load cells from other projects and usually, they are 12.7mm x 12.7mm (1/2") by 75mm long. This one is actually 12.7 x 12.7 x 80mm long not 75mm, and the holes on one side are M4 while the other side (with the wires) are M5.

The part had the wrong size hole on one of the threads. Poor quality assurance. They say the part has m4 hokes size but one was m5 on just one hole. Buy else where