Partsam 5X Amber 24 LED Smoke Cab Roof Running Top Marker Lights 264146BK Assembly Wire Harness Replacement for 1500 2500 3500 4500 5500 2003-2018 Pickup Trucks

So far not so good after 2 months one light stopped working.

These lights were of a better quality than stock. Had to replace because 3/5 lenses cracked and water leaked into my cab. The electronics were of high quality and sealed nicely compared to stock, easy to install plug & play. If doesn't light up then rotate back end that plugs in by 180 degrees to find correct polarity. DON'T OVER TIGHTEN screws. Tips - I used flex seal tape on the roof and under and ran the wires through an "X" that I cut out with an exacto knife to prevent any future leakage. Additionally, the base and screw holes were siliconed from the outside as well as the clips on the inside where the screws came through the roof. Before plugging in I applied a dab of dielectric grease to ensure no further corrosion and good connectivity. The biggest PITA was removing the headliner and posts. Main thing there is patience. Same for doing the extra little steps ex. silicone. This product used high quality screws and with the silicone, should last indefinitely. Looks great, very bright and directional. On a side note, if you decide to trim the flex seal tape after it is applied and peel any excess off, it is a mess! My friend now knows what we girls go through when waxing. Yep, it is a bit hairy on top but I don't care, you don't see it and most if all, this thing NO LONGER LEAKS! Excellent construction, better than stock, easy to use, well worth the price. PS - the screws go in N-S not E-W for anyone wondering.

Look great on my truck. Very bright.

2 working on 5 now that i have drill hole in my cab cant get them of

Noticed my cab lights leaking here in western Washington when summer finally ended. Went to replace the gasket on the recon lights that were installed when I bought the truck, but they were so stuck the wiring broke when I removed them and had to look for replacements.Settled on these because they were cheap and should work long enough for me to budget for the 200-350 dollar lights that I really want.These installed okay. Had a loose connection on the middle light but that may have been the truck side of the connection.. don’t like the Philips head that I had to use instead of the existing torx head screws that were just too short.It hasn’t rained since I installed. Will update if issues arise, otherwise no news is great news.