Co2 Tank Cylinder Direct Adapter (Gauge and Bleed Valve), CGA320 to TR21-4 Soda Machine Adapter with 60in High-Pressure Hose, Compatible for sodestream Soda Maker, Adapte to fizze/one touch/jet

Adapted c02 tank to SodaStream dispenser with no problem.

I recently purchased the CGA320 to TR21-4 Soda Maker CO2 Tank Cylinder Direct Adapter, and it has completely transformed my carbonation game. This adapter is a perfect fit for both my 5lb CO2 tank and my SodaStream "Source" seltzer dispenser, providing me a seamless and efficient connection that has elevated my home carbonation experience.The installation was a breeze, instructions were provided and washers were already in place (you get a second pair of washers too!) and I was thrilled to find that the adapter fit snugly onto both my CO2 tank and SodaStream dispenser without any issues. The build quality is impressive, ensuring a secure connection that doesn't leak and gives me the confidence to use it throughout the day.One of the standout features for me is the versatility it offers. With this adapter, I can now make unlimited carbonated drinks without the constant worry of depleting my CO2 supply. It has significantly enhanced the convenience and cost-effectiveness of my home carbonation setup.The ability to connect it effortlessly to my SodaStream Source Seltzer dispenser has been a game-changer. I no longer have to rely on small 14.5 oz CO2 canisters, and the larger 5lb tank means I can enjoy carbonated drinks for an extended period without the need for frequent CO2 purchases.Moreover, the peace of mind knowing that I won't run out of CO2 at inconvenient times is priceless. This adapter has truly given me the freedom to enjoy fizzy beverages at my own pace (which is a lot) without any limitations. I do turn the tank off after every use (Turn on tank, depress SodaStream 5 times, turn off tanks, continue to depress SodaStream to clear the line...usually get another 5 bursts of CO2).In conclusion, the CGA320 to TR21-4 Soda Maker CO2 Tank Cylinder Direct Adapter is a must-have for anyone looking to enhance their home carbonation setup. It fits perfectly, provides a secure connection, and offers the flexibility to enjoy unlimited carbonated drinks without the worry of running out of CO2. I highly recommend this adapter for its quality, ease of use, no metallic tastes and the freedom it brings to your carbonation experience. Cheers to endless fizzy delights!

I have to admit I was pretty skeptical. I have one of the first and simplest Sodastream makers (canister holders) and figured there might be some serious issues retrofitting an old but full CO2 canister my brother in law cast off from his old keg fridge. Didn't I need a regulator? Was this going to blow the seals? was that hose going to be strong enough? After using this for several months I can say that this is everything you need. No regulator needed - the gauge shows a constant near 1000 psi. I cut a notch in the bottom of my Sodastream to accommodate the hose through the base and it works great. In the first month I had a couple issues with some kind of back-pressure, but there is a bleeder valve near the pressure gauge, so it's easy enough to cure. Really no issues since then. Maybe eventually this setup will kill the seals, but so far, in savings it's paid for itself, and a replacement Sodastream base if it comes to that.Update: was having an issue again with not getting CO2 through the nozzle, so I went through the process of tearing everything down to see if there were issues with the seals. After looking at how the entire system is designed, I wound up resolving the issue by running a small needle through the end of the nozzle that injects into the water bottle to dislodge some piece of debris that found its way into the system. This is something that could happen even with the regular bottle exchange - and is perhaps even more likely with more frequent changes. After examining the connections and essentially very simple design of the system, I can say with a fair amount of confidence that you would be extremely unlikely to have "seals" fail (and that cleaning a blocked nozzle is something that can be done without tearing down the entire system). If the bottle is over-full, you can get some leakage through the pressure seal especially on the first injection, but after air drying between uses, it's an occasional minor annoyance that is easily prevented by either not exceeding the fill line or using a more gentle press on the first injection.

Worked well for about 9 months before the seal on the hose went out where it is crimped on, I manually opened the valve on the co2 tank for each use otherwise it will slowly leak, so 4 out of 5 stars.

I have another similar hose that feeds my Soda Stream that is connected to a 5lb Co2 cylinder. This hose works fine but is braided and very stiff. I thought I would try this hose as it is more flexible.It worked great for about 8 days. I noticed the my tank of Co2 only lasted about 8 days or so and needed to be replaced. Normally, I can go about 6 weeks. I thought the tank might have been light or some other problem but the place that I swap them out said the 5lb tanks are the only ones they weigh to verify they are full so getting a light one wasn't likely.I connected the new tank and this new hose and adapter. After about 8 days I noticed there was no pressure going into the water bottle. I checked the new tank and there was plenty of pressure left.I disassembled the connection and plugged in a regular Soda Stream canister and all worked fine. Then I plugged to new hose back in and the valve that connected to the Soda Stream leaked audibly. I tried to tighten it but risked breaking the soda stream so I replaced this hose and adapter with the old braided on and everything worked just fine.I am guessing there was a slow leak that accounted for why the first tank ran out so fast. The the valve failed altogether and the leak became audible.Liked the flexibility but perhaps their QC could be better. Can't recommend this system at this point.