Perlegear Universal Swivel TV Stand Base for 32–70 inch TVs, Height Adjustable Table Top TV Stand Mount with Tilt, Tempered Glass Base, Holds up to 88 lbs, Max VESA 400x400mm, PGTVS26

The stand was easy to securely attach a recently purchased 55 inch flat screen with no feet that had been taken down from my friend's media wall. I didn't want to remount to wall, so I shopped around for a quality stand. It looks great, and I love the way you can easily tilt tv up/down and left/right without fear of it falling because of its sturdy, weighted base. I love the functionality of the stand with its clear instructions that allow you mount multiple types of tvs. It was reasonably priced, and actually holds the large tv better than the plastic legs that came with my other tvs.

This stand was easy to put together and made our TV very adjustable, even though it's fairly large. (50 inch Roku TV) That was important to us because we have a new Roku TV, but it's on an old stand that we plan to replace before too long.For now we have it sitting at about 12 inches high, and still could move it up a couple of spots in the back. I anticipate the next entertainment center we buy will be taller, meaning I'll move the TV down on the stand.The price point was great for the item. The TV stand feels very sturdy and I am not at all worried about the TV falling/tipping over if bumped. As you can see in the picture this is near a door frame. The TV has been bumped many times, but it's never budged.The stand swivels well and you can lock the angle of tilt as well. I would purchase this again if I had another TV needing a stand... or if for some reason I end up wall mounting this TV I will keep this one so that I can have it for future use.The directions weren't hard to follow and it took me about 15 minutes to do leisurely on the ground while petting the dog. There are multiple different pieces so that it can attach to a variety of TVs.

Worked out great for our 55 inch flat screen. Looks nice and turns either way smoothly. The directions were easy and straight forward and the hardware is good quality.

This tabletop stand is a high quality alternative to hanging your television on the wall. My previous TV was a 55" model that sat on its own feet in the corner of a room on a small table since 2012. Its replacement is 65" Hisense whose legs stand 35" apart which is too near the edges of my table.Perlegear's table top stand is a nice alternative. I'm impressed with the compact yet solid design and the manufacturing tolerances ... this is not a piece of junk that was just slapped together. Assembly was easy, just need a Philips head screwdriver and the supplied metric hex wrench.The base is a heavy piece of tempered glass, which arrived with a dime-sized chip on its back edge. The defect surprised me, because the packaging/padding seemed quite adequate. Amazon arranged a quick free replacement of the entire stand; I simply returned the first one.I used the stand at its lowest height settings to position the 65" Hisense. The bottom edge of the TV is exactly 3-1/2" above the table. That would be a perfect amount of space for a soundbar; but I don't use a soundbar. So I wish the stand could go one notch lower. Nevertheless I am very happy with this purchase and recommend the Perlegear Universal Swivel TV Stand for 32–70 inch TVs.

This worked perfect for my TV! Very sturdy and easy to put together. Looks great and perfect size for my TV

Got this for a 65" LCD TV and it's a fantastic stand. So nice to be able to swivel the TV and it turns with the lightest touch while staying exactly where you put it.It also looks great, and is so great to be able to put it on furniture that has a small footprint, rather than something that can accommodate the very wide stance that TV feet have today.The stand is also very sturdy and the locks are handy to lock it in place on the frame. Plus if you want to hang it on the wall down the road instead, you can reconfigure it for that purpose.The only issue I had when assembling, is the short 4 screws supplied to attach the plate to the top of the stand. The plate has a bracket that is made to slide on to the top of the stand (over the holes that have a silver ring). So the screws go through the bracket holes and into the stand holes.Only they weren't long enough to be able to reach the threads in the silver-ringed holes. Because those holes (in the top of the stand) have a short neck before the threads start, and the bracket did not hug the top of the stand close enough... so the distance was too far for the very short screws to catch the threads. If I got one side in, I couldn't get the other... and if I put one screw in on one side, I couldn't get a screw in on the other (even without tightening it down).I could have tried taking the bracket off and bending it in some, but aside form it being very thick steel, I did not feel comfortable having those very short screws securing the very part of the stand that was going to be supporting the entire weight of the TV.So used 4 screws of the same size (but longer) that were VESA screws that also came with the kit, that I did not need for my TV, as mine used one of the larger sets. And the VESA screws were handier anyway because they were phillips heads. They are silver instead of black (the designated screws are black to match the stand mast) but you don't see them anyway and I felt much better using those! And since the stand is hollow, the longer length didn't matter, except it' made it super easy to attach the bracket and much more secure IYAM.On this point, in the manual it says (gist) if you want to tilt it and it's not budging, to slightly loosen two of these screws... another reason longer screws are better. (I don't need tilt but mentioned that because it's relevant here.) You don't want to back out a short screw that's only catching a few threads anyway, and potentially have it fall out... but won't have that concern with the longer screws.So I would buy it again in a second (but would personally do the VESA screw swap regardless). But did not take a star off because the stand is so very nice and the screws I needed were included, even if not intended for that purpose. And maybe most brackets hug the mast better so the short screws might work for most people and they won't know the difference.